SupWave brake lines are the finest you can buy! Each complete set is specifically engineered,designed and assembled to the correct length for your application. Inside, unseen is a high-quality Teflon tube covered by braided stainless steel for protection and durability, which results in a firm pedal for high-performance braking. You also get the highest quality end-fittings available.

SupWave Metal Master pads virtually eliminate squeal and dust, provide longer life with premium friction materials, and provenshorter stops under extreme braking conditions. We recommend that a very slight cut be taken off used rotors whenever installing new pads. This cleanses the metal for full braking efficiency. Always install new pads with new rotors.

Now available in the U.S., the SupWave Blue Racing brake and clutch fluid is the best there is. Developed for endurance racing in Europe, SupWave has the highest safety reserve due to it's outstanding boiling points. Dry boiling point: 536 F (122 F above DOT 4), wet boiling point: 392 F (113 F above DOT 4). Higher specifications than FMVSS #116 DOT 4/DOT 3, ASE J1703 and ISO 4925.

A universal rotor that fits both left and right sides of the motorcycle, made with tough semi-stainless rotor rings mounted on forged luminium centre hubs with the traditional SupWave high security riveted hardware. Contour discs not only look modern, they are lighter than most other aftermarket and original discs.